Tile Roofing Gilbert logo
Two-story tan stucco house with a terracotta concrete S-tile roof, one section stripped to new underlayment and battens with tile stacked for re-laying

Tile roofing in Gilbert, AZ

Tile Roofing Gilbert: Tile Roof Underlayment Replacement, Re-Roofing & Monsoon Leak Repair

Tile Roofing Gilbert takes requests for new underlayment under existing tile, full tile re-roofs and leak repair, and passes each one to an independent local roofer. Around Phoenix, the underlayment itself averages about $2 a square foot ($1 to $3) before tile handling and broken pieces, while a full tile replacement on a 1,500 sq ft roof lands near $12,400 to $38,800. Concrete tile lasts 30 to 50+ years and clay 50 to 100+, so the felt underneath usually fails first.

Arizona contracts over $1,000 have to spell out the deposit and every progress payment in writing, and Gilbert asks for no building permit on a re-roof that needs no structural change. Sending the form costs nothing; ask the roofer up front whether the roof walk and written scope are free too. Price and schedule are settled between you and the roofer.

Get a free tile roofing estimate

Free for homeowners and HOAs. One local contractor contacts you.

Residential Tile Roofing Jobs in Gilbert

More than half of Gilbert's homes were built between 1990 and 2009, according to the Census, and the median house dates from 2004. Building Advisor gives two layers of rated No. 30 felt 20 to 30 years, so many of those roofs have reached felt age unless they've already been re-laid. The tile on top is often fine while the layer under it has worn out, and that sets the order below: the jobs that come up most, then the smaller ones.

Tile roof mid re-lay with old felt peeled back beside new gray underlayment, battens and terracotta S-tiles stacked along the ridge

Tile Roof Felt Replacement and Re-Lay

A re-lay, also called a lift and relay or felt replacement, keeps your tile. The crew lifts it and stacks it on the roof, tears out the old felt, lays new underlayment and battens, replaces worn flashing, then sets the same tile back down. The 2018 code Gilbert enforces allows sound tile to be reinstalled but not cracked or broken pieces, and it requires deteriorated flashings and vents to be replaced. Angi puts Phoenix-area underlayment replacement at about $2 per square foot; ask whether a quote at that level includes lifting the tile, flashing and replacement pieces, because those are where re-lay quotes differ.

See Tile Roof Underlayment Replacement in Gilbert for felt grades and what a re-lay quote should list.

Single-story stucco house with the old tile torn off to bare plywood deck and broken concrete tile in a gray dumpster

Full Tile Roof Tear-Off and Replacement

A full replacement makes sense when the tile itself is worn out, when too many pieces are broken to match, or when you want a different profile or color. Everything comes off to the deck, because the code doesn't allow new roofing over existing clay or concrete tile. Removing the old roof adds $1 to $3 or more per square foot in HomeGuide's figures, and any rotted decking found underneath runs $2 to $5 per square foot to replace.

See Tile Roof Replacement in Gilbert, or decking replacement if the plywood under the old roof is soft.

Cracked terracotta concrete roof tile beside a matching replacement tile and a flat pry bar

Broken, Cracked and Slipped Tile Repair

Tiles crack under foot traffic, under falling branches and when they slip out of place. HomeGuide's national figures put a broken tile at $60 to $125 to replace and resetting slipped tiles at $300 to $750. A tile cracked across its full length or width has to go; a small corner chip can sometimes be glued. HomeGuide also warns that several loose or slipped tiles may mean the roof is due for replacement, so ask what's holding them before paying for a quick swap.

See broken roof tile repair for single-tile swaps, and Tile Roof Repair in Gilbert for bigger repair jobs.

Lifted roof tiles exposing cracked old felt underlayment with a water stain on the deck after a storm

Tile Roof Leak Repair After Monsoon Rain

Gilbert gets little rain most of the year, so a worn roof can stay dry until the first hard monsoon storm finds the gap. The National Weather Service counts monsoon season as June 15 through September 30. Water usually gets in where a tile has cracked or slipped, or where leaves in a valley push runoff sideways under the tile. HomeGuide lists leak repairs at $200 to $900 nationally. If the felt under the leak crumbles when touched, expect the roofer to talk about a re-lay rather than a patch.

See Tile Roof Leak Repair in Gilbert; damage from a storm itself has its own page on storm damage repair.

Hip ridge on a tile roof with caps set aside and a fresh bed of gray mortar laid along the hip

Ridge and Hip Re-Bedding

The rounded caps along ridges and hips sit on a bed of mortar or on a dry-set system. Loose or cracked caps let water into the hip and ridge. Phoenix-area microbursts commonly bring 40 to 60 mph winds and can top 100 mph, according to the Weather Service. Re-bedding means lifting the loose caps, setting them back in fresh mortar or a dry ridge system, and fastening them.

See Tile Roof Ridge Cap Repair in Gilbert.

New galvanized valley pan between two slopes of flat concrete tile with a new pipe jack flashing on a vent pipe

Valley Metal, Flashing and Pipe Jack Repair

Valleys carry the water from two slopes, and HomeGuide names debris in valleys, which backs water up under the tile, as a common leak cause. The code calls for valley metal at least 26 gauge, 11 inches each side of the center, with a 1-inch rib to stop water crossing over. Flashing at walls, chimneys and vent pipes ages too. HomeGuide's national range for flashing repairs is $200 to $1,700, depending on how much has to come apart.

See valley and flashing repair, plus tile roof ventilation for the vents that pass through the tile.

Solar panels detached from a tile roof and set aside, exposing mounting rails and a few broken tiles underneath

Solar Panel Removal and Reinstall on Tile Roofs

Panels hide the tile under them, so nobody can see what's cracked there until they come off. Any re-lay or replacement under an array means the panels come off, get stored and go back up. Agree in writing who detaches and resets them, how the mounts are flashed through the new underlayment, and who answers for a leak at those mounts afterward.

See Solar Panel Removal and Reinstallation in Gilbert.

Low-slope house roof half weathered white foam and half new sheathing and underlayment ready for tile, with a pallet of tile on the driveway

Foam and Shingle to Tile Conversions

Tile is heavy. Standard concrete tile runs about 900 to 970 lb per 100 square feet, and lightweight concrete 550 to 720 lb, so a roof framed for shingles or foam has to be checked before tile goes on. Tile also needs a slope of at least 2.5:12, so a foam section flatter than that needs new framing first. HomeGuide's national range for structural reinforcement is $1,000 to $10,000. A conversion that changes the structure is not covered by Gilbert's re-roof permit exemption.

See shingle to tile roof conversion; additions and new framing are covered under tile roof installation.

Gloved hand photographing a slipped tile from a ladder at the eave of a concrete tile roof

Tile Roof Inspection and Written Condition Report

Nobody can judge the underlayment from the driveway. A useful inspection lifts a few tiles in the places that age first (valleys, eaves, around vents) and comes with photos of what was found. HomeGuide suggests an inspection every three to five years or after damage, and Rosie on the House says once a year. It's also worth asking for one before you buy a house with an original roof.

See Tile Roof Inspection in Gilbert.

New metal bird stop closing the gaps under the first course of S-tiles beside an open older section with twigs

Tile Roof Bird Stop and Eave Closure Replacement

The first row of S-tile or barrel tile leaves open arches at the eave, and birds can nest in them. A bird stop is a metal or tile closure piece shaped to block those gaps. During a re-lay the eave course is off anyway, so that's the easy time to ask for new ones.

See tile roof bird stop and eave closure.

Tile roof valley filled with dry leaves and dust next to a cleaned section and a gray leaf blower

Tile Roof Maintenance Between Re-Roofs

Maintenance on tile is mostly keeping valleys clear and replacing cracked tiles before water reaches the felt. Keep foot traffic off the roof: tile breaks when it's walked on, so ask satellite, solar and pest crews to call before they climb up. Anyone who has to walk on it should step on the bottom 3 inches of each tile, as the tile maker Eagle advises.

See Tile Roof Maintenance in Gilbert for cleaning, coatings and upkeep.

Concrete and Clay Roof Tile Profiles on Gilbert Houses

The profile is the tile's shape. It matters for matching, for weight and for how the eave is closed off, so it's worth knowing what's on your house before you call.

Terracotta concrete S-tile roof with its wave profile in strong side light

Concrete S-Tile

The wavy S profile, often in terracotta or brown, is the shape most people picture as Spanish tile. Concrete tile lasts 30 to 50+ years in HomeGuide's figures. Its colored surface layer usually wears in the first ten years and the shade lightens, which is why a replacement tile rarely matches a 20-year-old roof straight out of the box.

See Concrete Tile Roofing in Gilbert, and Spanish tile roofing for the S profile in concrete or clay.

Two-story stucco home with a charcoal-brown flat concrete tile roof in straight courses

Flat Concrete Tile

Flat concrete tile gives a slate or shake look in straight courses. As with any tile, the courses should keep the standard 3-inch overlap: Rosie on the House warns that tiles stretched past it let water in, and the fix is a re-lay.

See Flat Tile Roofing in Gilbert.

Red clay two-piece barrel tile roof with orange-to-red color variation beside a stucco chimney

Clay Barrel Tile

Clay is fired, and Rosie on the House notes it won't fade in the sun the way concrete can; HomeGuide gives it 50 to 100+ years. Two-piece mission barrel tile, with caps over pans, weighs about 1,050 lb per square; one-piece clay S tile is lighter at 788 to 840 lb. Clay costs more installed, $8 to $25 per square foot nationally against $7 to $19 for concrete, and it chips more easily underfoot.

See clay tile roofing for the material and barrel tile roofing for the two-piece profile.

Lightweight Concrete Tile

Lightweight concrete tile cuts the load to roughly 550 to 720 lb per square, against 900 to 970 lb for standard concrete, which can shrink the reinforcement a conversion needs. An engineer still has to check the framing. The trade-off, per HomeGuide, is a higher price and tile that breaks more easily, so it suits roofs that nobody needs to walk on.

Tile Matching From Salvage Stock

When a profile or color has been discontinued, a re-lay can borrow sound tile from a hidden slope or the back of the house and put the closest available new tile there instead. Ask the roofer how many spares they plan to set aside, because cracked pieces can't go back on.

See Roof Tile Matching in Gilbert.

Tile Roof Cost in Gilbert

Angi's Phoenix pages put underlayment replacement at about $1 to $3 a square foot and a new tile roof on a 1,500 sq ft house at roughly $12,400 to $38,800. For repairs, HomeGuide's national range is $500 to $2,500 for most jobs. Neither publishes a Gilbert-only number.

  • Underlayment replacement (material and labor for the underlayment; tile handling may be extra)

    about $2 per sq ft in Phoenix, usually $1 to $3 (Angi). National range $0.75 to $4, or $1,500 to $8,000 for a 2,000 sq ft roof (HomeGuide).
  • Full replacement with new tile

    roughly $12,400-$38,800 at 1,500 sq ft, rising to $24,800-$77,500 at 3,000 sq ft (Angi Phoenix). Nationally $7 to $19 per sq ft for concrete and $8 to $25 for clay (HomeGuide).
  • Repairs (national)

    most $500 to $2,500; broken tiles $60 to $125 each; leaks $200 to $900; flashing $200 to $1,700 (HomeGuide).
  • Add-ons (national)

    old roof removal $1 to $3+ per sq ft, deck replacement $2 to $5 per sq ft, structural reinforcement $1,000 to $10,000 (HomeGuide).

Use them to sanity-check a quote rather than as a price, because the roof's size, pitch, profile, how many tiles break during the lift, and whether panels have to come off all move the number. Angi also puts Phoenix-area sales tax at 8.6% on materials and services, so ask whether it's included.

Gloved hands setting a flat concrete roof tile onto a wooden batten over new dark underlayment

Get a free tile roofing estimate in Gilbert

  • One request goes to one roofer, never to a call list
  • Free to send, with nothing to sign until you have a written price
  • Ask to see the R-42 or CR-42 license number on the contract
  • Ask how many replacement tiles the price allows for
  • You pay nothing for the introduction

Get a free tile roofing estimate

Free for homeowners and HOAs. One local contractor contacts you.

HOA and Commercial Tile Roofing in Gilbert

Tile roofs over shared buildings and rentals come with a second set of decision-makers, so say in the request who signs the contract and who approves the work.

HOA-Governed Neighborhoods

If your subdivision's CC&Rs limit tile color or profile, the HOA has a say before any change. The Registrar of Contractors says the owner has to tell the contractor about HOA restrictions before signing, so bring the approved color list or the architectural form to the first visit. A re-lay that puts the same tile back on usually raises fewer questions than a change of profile.

See HOA Tile Roofing in Gilbert.

Townhome and Multifamily Communities

Attached buildings share ridges, valleys and parapets, so a leak on one unit can start on the neighbor's roof. A board may want the work phased building by building, with a written scope that says where each phase stops and how the seams between old and new underlayment are lapped.

Churches, Schools and Offices

Work on a commercial building falls under the C-42 (commercial) or CR-42 (dual) roofing license rather than the residential R-42. Name the building type in your request, and check the roofer's license class in the ROC search before signing.

See Commercial Tile Roofing in Gilbert, which also covers apartments and rentals.

Landlords and Property Managers

An owner who lives elsewhere can ask for the inspection photos and a written condition report before choosing between a repair and a re-lay, and will need someone to let the roofer onto a tenant-occupied lot. Say which in the form, along with the best way to reach the tenant.

Desert Heat, Monsoon Wind and a Tile Roof's Lifespan

Phoenix Sky Harbor averages 111 days a year at 100°F or more, according to the Weather Service's 1991-2020 normals, and July's normal high is 106.5°F. Asphalt-based felt bakes under tile in that heat, and HomeGuide lists extreme heat among the things that cut underlayment life short. It also explains the gap between the two lifespans quoted in the FAQ below: Rosie on the House's 8 to 20 years speaks of underlayment in general, while Building Advisor's 20 to 30 assumes two layers of rated No. 30 felt.

The choice of underlayment matters more here than the tile does:

  • Rated No. 30 felt, two layers

    the minimum under tile, good for about 20 to 30 years. Felt sold as "30-pound" without an ASTM rating may weigh as little as 15 to 20 lb a square.
  • SBS-modified 40 lb underlayment

    Building Advisor says it can stretch that life by 50 to 100%.
  • Synthetic or rubberized

    more resistant to UV, high wind, tearing and extreme heat than felt, per HomeGuide.
  • Self-adhered (peel-and-stick)

    seals around nails, but it has to be a high-temperature product here, and it's close to impossible to remove at the next re-roof.

Wind is the other factor. Microbursts usually hit an area less than 2.5 miles across, so damage can be patchy. After a storm, look for tile pieces in the yard or gaps along the ridge from the ground, and leave the climbing to the roofer.

Gilbert Re-Roof Rules, HOA Approval and ROC Licenses

The Town builds to the 2018 International Residential Code, with its own amendments layered on top. Its amendments list "re-roofing not requiring a structural change" among jobs that need no permit, and the draft 2024 codes due in January 2027 keep it. A like-for-like re-lay or tile replacement needs no building permit. A conversion that adds framing does, and the Town's Development Services desk at (480) 503-6700 can confirm which side of the line a job falls on.

The code still applies without a permit. Tile needs at least a 2.5:12 slope, with double underlayment from 2.5:12 to 4:12; perimeter tiles need at least one fastener each; and new roofing can't go over existing tile.

On the contract side:

  • License

    R-42 for residential roofing, C-42 for commercial, CR-42 for both. Check it in the ROC's Contractor Search.
  • Written contract

    Arizona law requires any job over $1,000 to list the contractor's license number, the work, the total including tax, the deposit, each progress payment and when it's due, and the completion date.
  • Payments

    the ROC advises never paying cash, making checks out to the company named in the contract, and not letting payments get ahead of the work.
  • Recovery Fund

    hiring a licensed residential contractor gives access to the state fund, up to $30,000 per award.

From Roof Walk to Walk-Through

  1. STEP01

    Send the form or call

    Tell us the address area, the tile type if you know it, and what you're seeing: a leak, broken tiles, a roof that's due, or panels that need to come off.

  2. STEP02

    One local roofer gets it

    Your details go to a single independent roofer who works in Gilbert, and from there you arrange the roof visit with the roofer directly.

  3. STEP03

    Roof walk and written scope

    A good roofer will lift a few tiles at the valleys and eaves, photograph the underlayment, and tell you whether it's a repair, a re-lay or a replacement. Ask for the scope in writing, including how many replacement tiles it allows for.

  4. STEP04

    Contract and scheduling

    The contract should carry everything Arizona requires for jobs over $1,000, plus who handles HOA approval, solar removal and any permit a structural change needs.

  5. STEP05

    The work and the walk-through

    The old underlayment comes off, the new system and flashing go down, the tile goes back on, and the site is cleaned up. Walk the property with the roofer at the end and keep the photos and the final invoice with your house papers.

Tile Roof Requests Across Gilbert

Tile Roofing Gilbert passes requests from anywhere within Town of Gilbert limits to one independent local roofer, from the older streets near the town center to the subdivisions built in the 2000s and 2010s. If your roof is tile and your address is in Gilbert, send the form or call, and say whether the job is a leak, a few broken tiles, or a whole roof that's reached its age.

Frequently asked questions

What should I budget to redo a tile roof in Gilbert?

It depends on whether the tile stays. If the tile is sound and only the underlayment is worn out, Angi puts Phoenix-area underlayment replacement at about $2 a square foot, usually $1 to $3. A full replacement with new tile is a different job: Angi's Phoenix table shows about $12,400 to $38,800 for a 1,500 sq ft roof. Broken tiles, deck repair and solar panel removal come on top.

A few tiles cracked after a storm. Is that a big repair?

Usually not. HomeGuide lists broken or missing tiles at $60 to $125 each and most tile repairs at $500 to $2,500, with some roofers charging a $300 to $500 minimum. Look past the tile itself, though: a crack lets rain and sun reach the felt, so ask the roofer to check the underlayment under the broken piece while it's off.

My tile looks fine. Why would the roof still need work?

On a tile roof the underlayment and flashing keep the water out, and the tile mostly shields them from the sun. Building Advisor gives two layers of No. 30 felt 20 to 30 years, and Rosie on the House says the underlayment generally lasts 8 to 20. Gilbert's median house was built in 2004, so many original roofs are in that window even when the tile still looks new.

Is a re-lay really cheaper than buying new tile?

Usually, because the tile is the expensive part. In a lift-and-relay the tile comes off, new underlayment and flashing go down, and the same tile goes back on. HomeGuide's national figures put underlayment replacement at $0.75 to $4 a square foot and a new tile roof at $7 to $25 installed. No source publishes an all-in re-lay price, so ask for tile handling, flashing and replacement tiles as separate lines. The code lets undamaged tile go back on but not cracked tile.

Concrete or clay: which tile suits a Gilbert house?

Both are code-approved, and they differ mostly in lifespan, color and price. HomeGuide gives concrete 30 to 50+ years and clay 50 to 100+. Weight overlaps more than people expect: standard concrete runs about 900 to 970 lb per square, a one-piece clay S tile 788 to 840 lb, and two-piece clay mission about 1,050 lb.

Do solar panels have to come off for a re-roof?

For a re-lay or replacement under the array, yes: the tile and underlayment below the panels can't be reached otherwise. Plan for the panels to be detached, stored and reset, and ask who does that work, the roofer or a solar company, and whose name is on the warranty for the roof penetrations afterward.

How do I check that a roofer is licensed in Arizona?

Use the Registrar of Contractors' Contractor Search, linked from roc.az.gov. A homeowner's roof needs an R-42 (residential) or CR-42 (dual) roofing license, and the ROC suggests confirming the license class covers the work in your contract. Hiring a licensed residential contractor also gives access to the state Recovery Fund, which pays up to $30,000 per award.

Ready to get started in Gilbert?