Tile Roofing Gilbert logo
Two-story tan stucco house with a terracotta concrete S-tile roof, one section stripped to new underlayment and battens with tile stacked for re-laying

Tile roofing in Gilbert, AZ

Clay Tile Roofing in Gilbert, AZ

  • Installed price: national cost guides put a clay tile roof at $8 to $25 per sq ft installed. Around Phoenix, clay tile alone runs about $5 to $10 per sq ft, and terracotta $10 to $15.
  • Weight by profile: one-piece clay S tile weighs 788 to 840 lb per square (100 sq ft); two-piece mission comes in near 1,050 lb.
  • Lifespan: 50 to 100+ years for the tile itself, and plenty of clay roofs have passed the century mark.
  • Color: fired into the clay rather than coated on, so terracotta holds its color; some other clay colors can begin to fade after about 50 years.
  • Standard: clay roof tile has to meet ASTM C1167 under the code Gilbert enforces.

On a clay roof, the profile changes nearly everything below: the weight per square, the piece count and how a broken tile gets swapped. S, two-piece barrel or flat is worth knowing before you call. From a few chipped pieces to a whole new clay roof, Tile Roofing Gilbert introduces you to an independent roofer in the area. Guide prices like these give you something to hold a quote against; they don't price your roof.

Get a free tile roofing estimate

Free for homeowners and HOAs. One local contractor contacts you.

Clay Tile Roofing by Profile and Job

Clay roof tile comes in three broad shapes, covered first below. The fourth section covers repair.

Terracotta one-piece clay S tile roof with deep wave courses over a tan stucco wall in bright sun

One-Piece Clay S Tile

The one-piece S is the workhorse of clay roofing: NIST puts it at about 60% of the clay roof tile market. It gives a pan-and-cover look with half the pieces.

  • 75 pieces per square at 10.5 lb each (MCA)
  • 788 lb per square installed tile weight (MCA; NIST's generic range is 788 to 840 lb)
  • Spanish or Roman clay tile material: $2.50 to $11 per sq ft (HomeGuide)
Two-piece red clay mission roof with rounded cover tiles over pan tiles along a stucco parapet

Two-Piece Clay Mission Tile

Two-piece mission uses separate pans and covers, 150 pieces to the square, and at about 1,050 lb per square it outweighs a one-piece S. Material runs $4 to $14 per sq ft for mission or true barrel tile in HomeGuide's figures. Eave boosters, tapered versus straight pieces and how the covers are set are on the barrel tile roofing page.

Flat terracotta clay shingle tiles in tight straight courses on a steep stucco gable

Clay Flat and Shingle Tile

Flat clay looks like slate, shake or plain shingles, and it's the profile where weight surprises people. Small flat shingles take far more pieces per square than an S tile, and the weight follows. Ludowici's flat slab shingle tile is one example; HomeGuide adds that flat shingle tile takes longer to install than interlocking tile.

  • Ludowici flat slab: 1,300 lb per square at 3/8 inch thick, 2,000 lb at 5/8 inch, 480 pieces per square
  • Its listed minimum slope is 5:12, steeper than the code minimum for tile
  • Flat clay installed: $7 to $21.50 per sq ft (HomeGuide)
Roofer's gloved hands sliding a replacement clay S tile into a gap beside cracked terracotta pieces

Clay Tile Repair on Older, Brittle Roofs

Rosie on the House puts it plainly: clay outlasts concrete but breaks more easily, and HomeGuide lists "brittle; crack-prone in freezing temperatures" among clay's drawbacks. The Tile Roofing Industry Alliance (TRI) manual describes the swap: cut the fasteners, pull the broken pieces, repair the underlayment, then hang the new tile on the batten, or on a 12 by 6 inch piece of 1/2 inch plywood nailed to the deck where there are no battens. Mastic, hooks, wire or an approved adhesive at the head lap are the alternatives. Finding clay that matches a 25-year-old roof is its own job; see roof tile matching. For what one cracked piece costs to swap, see broken roof tile repair.

Gloved hands setting a flat concrete roof tile onto a wooden batten over new dark underlayment

Why Gilbert homeowners and HOAs call Tile Roofing Gilbert

  • One request goes to one roofer, never to a call list
  • Free to send, with nothing to sign until you have a written price
  • Ask to see the R-42 or CR-42 license number on the contract
  • Ask how many replacement tiles the price allows for
  • You pay nothing for the introduction

Get a free tile roofing estimate

Free for homeowners and HOAs. One local contractor contacts you.

Clay Tile Grades, Color and Service Life

Clay is sold by grade. HomeGuide calls Grade 1 the most durable and the most expensive, with Grades 2 and 3 meant for milder places than coasts or freeze-thaw country. Grade shows up in the price, so ask which one a quote assumes. The code only asks for ASTM C1167.

Color is where clay earns its premium. HomeGuide says the color is baked in with no surface layer to wear away, that terracotta doesn't fade, and that some other clay colors may start to fade after about 50 years. Concrete works differently, and the concrete tile roofing page explains how its surface lightens in the first decade.

The catch is underneath. NIST notes that clay tile rarely needs replacing but the underlayment below it does, and that the tile is normally lifted and reused when that happens. In other words, a 60-year clay roof will probably need at least one underlayment replacement along the way. Plan for that cost, not for new clay.

What Moves the Price of a Clay Roof

  • Clay type

    Angi's Phoenix figures put clay material at $5 to $10 per sq ft and terracotta at $10 to $15.
  • Glaze

    HomeGuide says unglazed tile sits at the low end and glazed tile costs the most, with more color choice.
  • Profile

    two-piece barrel doubles the piece count of a one-piece S, and Angi puts barrel at the top of its tile list for installation labor.
  • Framing

    clay that's heavier than what the roof carried before may need an engineer's check; that process is on the shingle to tile conversion page.
  • Breakage allowance

    cracked tile can't go back on, so ask how many spare pieces a re-lay quote assumes and where they come from.

A clay quote that doesn't name the profile, grade and underlayment can't be compared with the next one, so ask for all three in writing.

Ready to get started in Gilbert?