
Tile roofing in Gilbert, AZ
Concrete Tile Roofing in Gilbert, AZ
- Installed cost: $7 to $19 per sq ft in national figures; around Phoenix the tile alone runs about $5 per sq ft before labor.
- Lifespan: 30 to 50+ years for the tile, longer than the underlayment beneath it.
- Weight: Eagle's Capistrano, Ponderosa, Bel Air and Golden Eagle profiles weigh about 900 to 970 lb per 100 sq ft in standard concrete, 550 to 720 lb in the lightweight versions.
- Profiles: high S, medium double-S and flat, with lightweight versions of several.
- Standard: concrete roof tile must meet ASTM C1492 under the code Gilbert enforces.
Whether you keep the current look or change it, the profile and color name already on the house are useful to know. Tile Roofing Gilbert matches your request with a local independent roofer for new concrete tile, a concrete tile repair or a re-roof. Each figure above is a published guide or manufacturer number for sizing up an estimate, not an estimate itself.
Concrete Tile Roofing Profiles and Jobs
The tile industry sorts roof tile by how far its surface rises: low profile is flat tile with a rise of 1/2 inch or less, medium profile has a rise-to-width ratio of 1:5 or less, and high profile is anything steeper. Concrete tile comes in all three, and the profile decides the trim, the eave closure and how easy a matching replacement will be.

High-Profile Concrete S-Tile
The tall, wavy S-tile is concrete's version of Spanish clay tile. Eagle calls high-barrel S-tile the most recognized of all tile profiles and sells it in clay-look blends as well as solid colors. Blends make repairs easier to hide, since no two tiles in a blend match exactly anyway. A solid color is the hardest thing to patch on an older roof. Trim pieces and blends for S-tile are on the Spanish tile roofing page.
- Typical weight of a standard high-barrel profile: about 900 lb per 100 sq ft
- Lightweight version of the same profile: about 570 lb
Medium and Low-Profile Concrete Tile
A medium-profile tile has a gentler double-S wave. Eagle's definition is a maximum rise of 1 inch for every 5 inches of width. It reads as a softer roofline than high S-tile, and Eagle pitches it for modern designs and larger buildings such as apartments. The lower rise also leaves smaller openings at the eave than high S-tile, so ask which eave closure the roofer plans for that first course; the closure options are on the bird stop page.
Flat Concrete Tile
Flat concrete tile is shaped to look like slate or shake, and its weight depends on the profile: Eagle lists its flat Bel Air and Golden Eagle at about 970 lb per 100 sq ft and its shake-look Ponderosa at 903. The slate and shake looks and their slope limits are covered on the flat tile roofing page.

Lightweight Concrete Tile
Lightweight concrete swaps some of the weight out of the mix. Eagle markets its EagleLite line for re-roofs, sells it only in the western US and tells buyers to ask a roofer whether it suits the structure. HomeGuide names the trade-off: lightweight tile costs more and breaks more easily.
That makes it a tool for framing that can't carry standard tile, not an upgrade for its own sake. When the framing needs work anyway, see the shingle-to-tile conversion page for the structural side.

Concrete Tile Repair and Replacement
Concrete tile repairs mostly come down to matching. Weathering lightens the color over time (see below), and the tile industry manual adds that small differences in sand, cement and pigment cause slight shading even within a batch, which is why installers spread tile from several pallets across each roof plane. Per-tile repair prices are on the broken roof tile repair page, and a worn-out concrete roof is a tile roof replacement.

Why Gilbert homeowners and HOAs call Tile Roofing Gilbert
- One request goes to one roofer, never to a call list
- Free to send, with nothing to sign until you have a written price
- Ask to see the R-42 or CR-42 license number on the contract
- Ask how many replacement tiles the price allows for
- You pay nothing for the introduction
Concrete Tile Weight, Lifespan and Wear
Concrete tile is heavy, long-lived and slow to wear out, which is why most of the work on a concrete roof happens underneath it.
Weight
HomeGuide puts common concrete tile at 900 to 1,100 lb per square, more than double asphalt shingles. Eagle's own specs put standard profiles at 900 to 970 lb per 100 sq ft, about 88 tiles per square on its flat profiles. For comparison, a one-piece clay S-tile runs 788 to 840 lb per square.Lifespan
30 to 50+ years on average for concrete tile, and most makers warranty tile for at least 50 years. The underlayment under it typically wears out first.Surface wear
Eagle says the cement-rich colored surface layer typically erodes within the first ten years, lightening the overall color, and wear slows sharply after that. The tile industry manual notes that some lightening over time doesn't affect the tile's strength or how it sheds water.Efflorescence
a white, chalky bloom from free lime in the cement is common on all concrete tile, temporary and harmless to the tile.Code
concrete roof tile must comply with ASTM C1492, and clay with ASTM C1167.
Concrete Tile Cost Around Phoenix
National guides put concrete tile at $7 to $19 per sq ft installed, or $10,500 to $47,500 for a typical roof. Angi's Phoenix figures put the concrete tile itself at about $5 per sq ft, with labor at $5 to $18 per sq ft on top. Clay costs more, but the gap depends on the product; the clay numbers are on the clay tile roofing page. The biggest cost lever on an existing concrete roof is whether the tile can be reused: if it can, a re-lay with new underlayment keeps the tile and replaces only what's worn.
Frequently asked questions
Our replacement tiles look darker than the rest of the roof. Did we get the wrong color?
Probably not. New tile of the same name looks darker and richer than tile that has weathered for years, for the surface-wear reason in the section on weight, lifespan and wear. Ask the roofer to borrow tiles from a hidden slope for the visible spot and put the new ones out of sight.
White chalky patches showed up on our new concrete tile. Is it defective?
That's most likely efflorescence, a salt deposit from the cement. The tile industry's installation manual calls it a temporary surface discoloration common to all concrete tile, with no effect on strength or function, and says weather usually removes it over time.
Is lightweight concrete tile a good idea for our older roof?
It can be, if the framing is the concern; the standard and lightweight weights are listed at the top of the page. HomeGuide notes it costs more and breaks more easily, so it suits roofs nobody needs to walk on. Ask the roofer whether your framing needs it at all.
Can a concrete tile roof get by on repairs for its whole life?
The tile often can. Rated at 30 to 50+ years, it usually outlasts the felt under it, so the typical life of a concrete roof includes repairs, then a re-lay with the same tile, then eventually new tile. Plan for the re-lay rather than hoping to skip it.
Is concrete tile made anywhere near here?
Yes. Eagle Roofing Products, one of the main US concrete tile makers, runs its Southwest plant in Phoenix.
